Automatic Large Size Igu Making Aluminum Windows and Doors Processing Double Triple Layers Dgu Unit Production Line Insulating Glass Machine with Glass Washer

• Customization: Available
• Certification: CE, CE, ISO
• Condition: New
• Model NO.: LBP2850C
• Glass Thickness Range: 5 mm - 30 mm
• Warranty: 12 Months for Free, Lifetime Warranty, 2 Years for Free
• Type: Insulating Glass Production Line
• Structure: Vertical
• Glass Washing Machine Type: Horizontal Glass Washing Machine
• After-Sales Service: 12 Months for Free, Lifetime Warranty
• Function: Glass Processing Machine
• Use: Insulating Glass Making Machinery
• Main Use: Aluminum Doors and Windows
• Name: Double Glass Machine
• Model: Lbp2850c
• Max. Processing Size: 6000*2850mm
• Washing Speed: 3-10m/Min
• Running Speed: 15-45m/Min
• Min. Processing Size: 450*200mm
• Power Supply: 380V/50Hz
• Total Power: 51.35kw
• Single Glass Thickness: 3-28mm
• Total Weight: 15000kgs
• Automatic: PLC Control
• Glass Washing: Yes
• Transport Package: Nude Package
• Specification: 29500*2500*4050mm
• Trademark: BOKE
• Origin: China
• HS Code: 8464901900
• Production Capacity: 1600 Square Meter Per Day

Product Description

Product Description

 

1. Brief Introduction of LBP2850C IG Line (for max. 6000*2850mm size glass)
This Vertical Insulating glass machine is composed of
1) double loading section
2) washing and drying section,
3) hollow out conveyor section
4) hollow out light inspection and aluminum frame location section,
5) double out-panel assembly,
6) large stroke press machine  
6) storage and unloading section.
With special design, it can wash Low-E glass effectively with high speed.

2. Main features of  LBP2850C insulating glass production line

1. Automatically distinguish the coating side of coated glass and Low-E glass, indicated by alarm.
2. The washing machine adopts stainless steel and other corrosion resistant material, with excellent waterproof performance, safety, clean and long service life. The combination of heavy caliber stainless steel wind knife, soft cot and high-pressure low-noise fan can effectively improve the cleaning and drying effect, and greatly improve the production efficiency.
3. Can process same edge double layers and triple layers insulating glass with high efficiency.
4. Adopts the world-famous brand low-voltage apparatus, sensor and PLC, etc. Make the line has longer service life.
5. PLC control system with touch screen interface, easy to operate, and self-diagnosis the fault of the line with high degree of automation.
6. The two hollow sections can easily check and wipe the glass on both sides, which can improve the efficiency and ensure the glass quality.
7. The press machine can be opened in large journey to maximum 500mm, which is convenient for maintenance. Twice pressing can do super long glass.
8. Drying section adopts the circulation of hot air to ensure the drying effect of the glass and reduce noise.
9. The function of glass position memory can improve the work efficiency.

Product Parameters

 

Main Parameters of LBP2850 Insulating glass production line
 

Parameter name		LBP2850C
Power supply		380V / 50HZ
Total power		51.35 Kw (include water heater 10Kw)
Glass processing size	Max. (L*H)	6000x2850(mm)
	Min. (L*H)	450x200(mm)
	Single glass thickness	3-28(mm)
Work speed	Washing speed	3-10m/min
	Running speed after washing	15-45m/min
Outline Dimension	(L*W*H)	29500*2500*4050(mm)
Total weight		15000kg

 

Name	Country	Brand
Photoelectric switch	USA	BANNER
Optical fiber switch	Japan	KEYE
Selection switch	France	SCHNEIDER
Push-button switch	France	SCHNEIDER
Indicating lamp	France	SCHNEIDER
Foot switch	CN&USA joint venture	CHINT
Micro switch	Taiwan	TEND
Hot protection	France	SCHNEIDER
AC Contact device	France	SCHNEIDER
PLC	Taiwan	Delta
Transducer	Taiwan	Delta
Air switch	France	SCHNEIDER
Switching power supply	France	SCHNEIDER
Touch screen	Taiwan	Delta
Intermediate relay	Taiwan	Delta
Temperature control meter	Taiwan	Delta
Transmit motor	China	Hengshui
Hydraulic valve	Taiwan	YUTIEN
Vacuum Sucker	Korea	YSC
Limit switch	USA	BANNER
Bearing for brushes	Sweden	SKF
Circuit breaker	France	SCHNEIDER
Magnetic valve	Taiwan	AIRTAC

 

Detailed Photos

 

It is the first section of the line and its main function is to transmit the glass to the washing and drying section.
Low-E glass automatic diagnosis system. The back board is high quality Aosong board through the NC machining and wheel combination, makes it beautiful and durable.

1) Washing part: This part has three pairs of soft brushes (the material is high -temperature nylon wire ) and two pairs of sponge roller. The brushes are driven by three synchronous motors separately and the movement is stable. Three pairs of tubular rollers type of hair brushes, use High Temperature Resistant and soft nature hair brush, effective protection of the coating glass especially the LOW-E glass layer stratification. There are five pairs of rollers in washing box, it can make the glass move smoothly.
2) Drying part: this part is also made of stainless steel. The air enters into the air knife from the top. The distance between the air knife and the glass should be adjusted according to the thickness of the glass in order to guarantee the drying effect. Air passage adopts the most advanced design and increase the drying speed and productivity. There are one pair of wind knife. The angle of the wind knife changed automatically when the thickness of glass changed. This make sure the glass is dry.
1) The photoelectric switch is mounted on the crossbeam to automatically induce the height of the glass.
2) Two pieces of crossbeam, better positioning the glass and the spacer.
3) An entry box is provided on the back. In processing of big size laminated insulating glass, this design is very practical. Because the laminated glass often attached some hard dirt, it's not easy to clean off with the machine. That needs the workers to clean the hard dirt by manual. If the dirt is on the inside, the workers can go into the entry box to clean them by manual.
This section is used to transmission and store the glass to improve the work efficiency.
The red wheel is controlled by Airtac cylinder, and they can easily push the glass tightly together.
The sensor can easily know the glass position and stop at right place when glass coming from the light and spacer bar location section.
There is a glass detection device on the crossbeam, which always stops at the position of 10cm above the glass, and does not have to go up and down once every time, greatly improving the assembly speed. Second pieces of glass are located accurately. It is completed by the manipulator, without pushing and positioning by manual, and the automatic assembly is realized.
The press board is controlled by the motor and roller shaft screw. The motor accurately calculate the distances of the glass, and then press the board smoothly through the roller shaft screw at uniform speed.(instead of pressure and hydraulic regulation).
The back board of the Press section with double support, While ensuring the good effect of press, the service life of this section is increased.
In this section, the front cabinet is bending from a whole piece of steel plate(with powder spraying), No Welding, so that it is durable and not deformable. The back plate board is high Aosong density board with film, which is waterproof, non-deformation, and durable.
When the length of the glass is larger than the length of the flat press section, two times of compression can be carried out.
The press machine can be opened in large journey to max. 500mm, easy to maintenance.
Adopts imported high quality vacuum generator, it can keep pressure more than 0.8Mpa, and also can automatically adjust the sucker's power, avoid glass falling down. (Inside assembly function is optional.).
 

Section 7 Transmission and Storage Section

This section is used to transmit and store the glass to improve the work efficiency, and ready to unload the IGU or connect to Automatic Sealing Robot.
 

Installation Instructions

 

This equipment can work alone, or equipped with IG unit sealing robot. The later condition can develop more efficiency.

The insulating glass processing machine includes: 
Insulating glass production line
Sealing robot
Butyl coating machine
Desiccant filling machine
Automatic aluminum spacer bending machine
and so on.

Certifications

 

The CE CERTIFICATE OF INSULATING GLASS PRODUCTION LINE

Company Profile

 

Founded in July 2000, the company is a high-tech enterprise integrating production, scientific research, development and sales, specializing in the development and production of ZHENGTONGDA brand high-grade insulating glass processing equipment.

Since its establishment, the company has carried out a lot of search and development in the field of insulating glass processing equipment, accumulated rich practical experience, established a perfect sales and service system, and developed a complete set of insulating glass processing equipment of ZHENGTONGDA brand, which is sold all over the country and many countries in the world.

Our products cover a wide range of industries with various categories. Shandong Boke has successfully certified with ISO9001 quality system certificate and CE certificate.

In the beginning of 2017, BOKE set up a new trade company called Shandong XY International Trade Co., Ltd, which is used for export all the goods. Shandong BOKE CNC Equipment Co., LTD will always be dedicated to provide you with high-quality products and service, to help you achieve the future.

 

Our Advantages

 

1) We are one of leading manufacturers in China and have 22 years experience in IG production line field.
2) We have supply more than 5000 IG lines until Dec. 30, 2020.
3) We have 13 patent rights.
4) Under ISO9001:2008we supply good quality machines.
5) We pay much attention to after-sale-service, and we have our own service team; we can supply overseas service.
6) We have good reputation in China and share more than 20% of domestic market.

 

FAQ

 

1.Are your company a trading one or a factory? 
Factory(Shandong BOKE CNC Equipment Col, Ltd) + trade (Shandong XY International Trade Co., Ltd), 22 years' focusing on insulating glass processing equipment and curtain wall equipment.

2.After an order is placed, when to deliver?
45 working days for whole production line, 30 working days for single machine.  Special requirement please check with sales.

3. Guarantee ?
12 months guarantee (wearing parts are out of this range). Life long service. BOKE will send engineers for service upon request onsite.

4.What about the services and product' quality?
 Each machine must be carried out 100% quality examination and test before shipment.
 And all machines meet ISO and CE certification.